Led driver power supply 12v 300w transformer for lighting
A waterproof power supply is suitable for moudel LED lighting Waterproof IP67 led driver 12v 24v 300w led driver power supply could be used in outdoor and indoor location.with 100-265vac to dc transformer.
Feature
● IP67 design for indoor or outdoor installations
● Protections:Short circuit/Overload/Over temperature
● Cooling by free air convection
● 100% full load burn-in test
● Suitable for LED lighting
● 2 years warranty
Specification
SPECIFICAION
MODEL
SMT-012-300VN
SMT-024-300VN
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
25A
12.5A
CURRENT RANGE
0~25A
0~12.5A
RATED POWER
300W
300W
RIPPLE&NOISE(max)
<240mV
<240mV
voltage TOLERANCE
12V±5%
24V±5%
VOLTAGE TOLERANCE
±0.5V
±0.5V
SETUP RISE TIME
80ms/110VAC
80ms/110VAC
HOLD UP TIME(Typ.)
60ms/110VAC
60ms/110VAC
INPUT
VOLTAGE RANGE
100~265Vac
100~265Vac
FREQUENCY RANGE
50~60Hz
50~60Hz
POWER FACTOR(Typ.)
no PFC
no PFC
EFFICIENCY(Typ.)
﹥83%
﹥84%
AC CURRENT(Typ.)
0.35A/220V
0.5A/220V
INRUSH CURRENT (Typ.)
COLD START 30A/110~220VAC
PROTECTION
Short circuit
Protection type:recovers automatically after condition is removed
Overload
overload protected@130-150% above peak rating
Over temperature
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-30~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing(Waterproof)
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13;SELV;IP67 approved
WITHSTAND VOLTAGE
I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
NOTE
1.All parameters NOT specially mentoned are measured at 220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallelcapacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
 |
 |
 |
 |
