LED drive power is the power supply voltage or current which is converted to a specific current to drive the LED power converter, and constant current led driver is an ideal choice which may expensive than constant current. And today, we will talk about the distinction about these two kinds of type. 1. The so-called constant-current / constant voltage is within a certain range of the output curren...

Different people have different opinion about how to choose a lighting control system to make it suit the lamp. As per our experience, the key point is choose a good dimmable led driver. Different type of dimming modes are used according to different environment and requirement. Hence it is quiet important to choose the dimmable led driver. Especially when it involve the control system or dimmer o...

Some of our clients will meet some installation problems when they install our Dimmable LED Power Supply. What you should check first when there have issues for your 12 Volt Led Electronic Driver? Pls. review following items: 1. Fixture does not illuminate --Ensure the system is wired correctly and polarities are correct. --Ensure a compatible constant voltage dimmable fixture is installed. --Ensu...

LED lighting is the most popular way for illuminating home, industrial,commercial, hospitality and sports venues. To support LED lighting, there are many kinds of drivers which are developed to work with all kinds of lighting.For example: Constant voltage led driver Constant current led driver Enclosure power supply (smps) Switching power adapter Triac Dimmable Led Driver 0~10v /pwm/resistor dimma...

When operating LED lights, you need a Class 2 LED Power Supply to convert your standard line voltage (120V or 277V) into low voltage (12V or 24V). This allows your lights to function properly. To figure out how many lights you can power with a single power supply, look to the minimum and maximum wattage ratings. The led power supply's minimum wattage rating tells you the smallest number of watts i...

1. Why the output current of the 0-10V dimmer is: Output current: 50mA, why is it set to 50mA? How to calculate the power consumption of the dimmer output current of the power supply? Answer: The output current of the dimmer made by each manufacturer is different. The above 50mA is designed by ourselves without any reference guidance. It is mainly calculated for the current absorbed...

Before selecting a dimmer switch for your LEDs or compact fluorescents, you need to make sure you have the proper type of bulb available, there are several choices, a-style, decorative, reflectors and MR16. R20, R30 and R40, spiral shape. However, different leds require different technology, you should purchase dimmers that state they with the compatibility with your bulbs. Secondly checking the l...

SMARTS manufacturer kinds of led dimmers : triac dimmer,0-10v dimmer and DALI dimmer. They are all designed as European standard and national standard universal type, which is suitable for European circular mounting holes and also suitable for the installation of the 86 version of the base. Our dimmer switch use scratch-resistant glass panel, touch switch dimming, knob button switch, dimming. Here...

1) How does the PWM dimming system realize the control of LED lights? Is it necessary to add a 0-10V dimming switch board behind the PWM system to control the lights of different circuits? If possible, a PWM system can finally bring several 0-10v led dimmer switch boards? Answer: First of all, the above understanding is wrong. Must first understand PWM dimming system and 0-10V dimming pa...

Knob version:SMT50-R-D1     1. Push-button switch, can be turned off or on at any brightness 2. With output LN port, the dimming power input can be powered from the dimmable led light switch, and the power input will be cut off at the same time after turning off the single dimmer switch 3. With fine-tuning output signal voltage, for signal lines that need to be stretched very long, ...

Yes, we have 48V led driver with UL CE certificate. It is constant voltage led driver, the input voltage range is 110-277Vac, for both North America market ( USA & Canada) and Europe market. In this series, we have dimmable and non-dimmable led drivers as options. Hence just let us know the outputs and you need dimmable to not dimmable led driver, we will help you recommend related version. Fo...

Yeah, we have 12V and 24V DMX 512 dimmable led driver, wattages from 30w to 300w dimmable led driver. We are in the progress of applying CE UL certificate, they maybe complated around mid of April, hopeful. Its input voltage range is 110-277Vac, it has different channels to be chosen, 1CH, 2CH, 3CH, 4CH or 5CH. With NFC (Near Field Communication) function, read and write DMX512. Adjust output volt...