1. Fixture does not illuminate
--Ensure the system is wired correctly and polarities are correct.
--Ensure a compatible constant voltage dimmable fixture is installed.
--Ensure the driver and fixture have the same
--voltage specifications (12V & 12V, or 24V & 24V).
2. Fixture is quickly flashing or flickering
--Verify a compatible dimming control is installed. If flickering is apparent at low light levels install a compatible trim-adjustable dimming control.
--Ensure a compatible constant voltage dimmable fixture is installed.
--Ensure different fixture types are not connected to a single driver. Different fixture types must be connected to individual drivers.
--Ensure all connections are properly secured.
--Ensure fixture is receiving the correct input voltage
3. Fixture is slowly flashing
--Ensure driver is not overloaded. An overloaded Triac Dimmable Led Driver will cause the internal auto-reset to trip repeatedly
4. Installation Trips Main Breaker
Check wiring for short circuit. If breaker continues to trip there may be a short in the driver.
5. Fixture does not dim
--Ensure a compatible constant voltage dimmable fixture is installed.
--Ensure a compatible dimming control is installed and wired correctly.
6. Different fixture types do not dim in sync
-- Different fixture types have different circuit designs and may react differently when dimmed. Ensure each fixture type is installed on a separate driver for best performance.
If you have checked all above items but problems still exist, pls. contact with Mr. Steven(skype: steven821228 mail:steven@smartselectronic.com.cn) .