industrial power supply 12v 100w
Product Description
Product parameters:
Model
SMT-005-100SA
SMT-012-100SA
SMT-015-100SA
SMT-024-100SA
SMT-036-100SA
SMT-048-100SA
output
DC voltage
5V
12.5V
15V
24V
36V
48V
Voltage tolerance
±2%
±1%
±1%
±1%
±1%
±1%
Rated current
20A
8.33A
6.6A
4.17A
2.78A
2.08A
Current range
0~20A
0~8.33A
0~6.66A
0~4.17A
0~2.78A
0~2.08A
Rated power
100W
100W
100W
100W
100W
100W
Ripple&noise
100mvp-p
150mvp-p
150mvp-p
150mvp-p
150mvp-p
150mvp-p
DCvoltage ADJ.range
± 10%
±10%
±10%
±10%
±10%
±10%
input
Voltage range
100~240Vdc
frequency
47~63HZ
AC current
3.2A/115VAC,1.6A/230VAC
efficiency
83%
82%
82%
83%
82%
83%
Inrush current
Cold start current 18A/115VAC,36A/230VAC
Leakage current
< 1mA/240VAC
protection
overload
Rated output power115%~150% start over load protection
protection type:cutoff output,recovery after restart power
Over voltage
6.8~8.2V
15.6~17.8V
18.6~20.8V
30.6~33.2V
33.2~35.6V
54.8~56.6V
protection type:hiccup mode,auto-recovery after fault condition is removed
environment
Working temp,humidity
-10°C~+60°C,20%~90%RH
Storagetemp,humidity
-20°C~+85°C,10%~95%RH non-condensing
Withstand vibration
10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes
safety
Withstand voltage
I/P-O/P:2.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
Fitstandard
EMC standard
Comply with EN55022,CLASSA
others
Dimension
160*88*34mm (L*W*H)
Weight/packing
0.65kg/20pcs/13.5kg/0.0318 m³
note
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation
Features:
-
Constant voltage design with high accuracy.
-
International wide input voltage.
-
output voltage 5v/12v/24v/36v/48v selectable.
-
Wattage: 15w-600w.
-
High efficiency, save energy, protected environment.
-
High stability and low ripple, increase light efficiency and decrease light attenuation.
-
Meet to safety standard and EMC.
-
Assure LED stability long lift and light efficiency by constant voltage.
-
Overcurrent, overvoltage, overheat, short curcuit protection:Auto-recovery
-
Start,raise,stable time: 500ms,30ms,40ms/230VAC,500ms,30ms,16ms/115VAC
-
Cooling by free air convection.
-
100% full load burn-in test.
-
Brand electrotronic components.
-
ROHS material.
-
Well match with LED guardrail lamp, Flood light, light word, street lamp etc, For LEDs series-parallel.
Environment :
-
Working Temperature : -25 ~ +50°C
-
Working Humidity : 20 ~ 90% RH non-condensing
-
Storage Temp. , Humidity : -40 ~ +80°C , 10 ~ 95% RH
-
TEMP. Coefficient : ±0.03%/°C (0 ~ 50°C)
-
Vibration : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety :
-
Safety Standards : IEC 61347 –2–11 , IEC 61347 –1 , IEC 60529 , IP67 approved
-
Withstand Voltage : I/P-O/P: 3000KVAC
-
Isolation Resistance : I/P-O/P:100M Ohms/500VDC
Application:
-
Indoor LED illuminating lights
-
LED Neon, LED urban Decoration
-
LED Lighting Advertising,LED Display
-
Safety Protection Apparatus
-
Telecommunications, Networks
-
Vehicle Lights, Controller Panels
Packaging & Shipping
Packing:
Company Information
Quanzhou Smarts Electronic & Technology Co.,Ltd (SMARTS INDUSTRIAL (HOLDING) CO LTD) was founded in 1998. The company is located in a developed economy, abundant resources, beautiful scenery of Quanzhou city Licheng district town pontoon, the company has an area of 2000 square meters, production workshop, warehouse, office, living facilities complete with. With the development of society, human increasing awareness of "green energy, environmental protection, save energy" becomes...View this Supplier's Website
Product parameters:
Model |
SMT-005-100SA |
SMT-012-100SA |
SMT-015-100SA |
SMT-024-100SA |
SMT-036-100SA |
SMT-048-100SA |
|
output |
DC voltage |
5V |
12.5V |
15V |
24V |
36V |
48V |
Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
|
Rated current |
20A |
8.33A |
6.6A |
4.17A |
2.78A |
2.08A |
|
Current range |
0~20A |
0~8.33A |
0~6.66A |
0~4.17A |
0~2.78A |
0~2.08A |
|
Rated power |
100W |
100W |
100W |
100W |
100W |
100W |
|
Ripple&noise |
100mvp-p |
150mvp-p |
150mvp-p |
150mvp-p |
150mvp-p |
150mvp-p |
|
DCvoltage ADJ.range |
± 10% |
±10% |
±10% |
±10% |
±10% |
±10% |
|
input |
Voltage range |
100~240Vdc |
|||||
frequency |
47~63HZ |
||||||
AC current |
3.2A/115VAC,1.6A/230VAC |
||||||
efficiency |
83% |
82% |
82% |
83% |
82% |
83% |
|
Inrush current |
Cold start current 18A/115VAC,36A/230VAC |
||||||
Leakage current |
< 1mA/240VAC |
||||||
protection |
overload |
Rated output power115%~150% start over load protection |
|||||
protection type:cutoff output,recovery after restart power |
|||||||
Over voltage |
6.8~8.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
33.2~35.6V |
54.8~56.6V |
|
protection type:hiccup mode,auto-recovery after fault condition is removed |
|||||||
environment |
Working temp,humidity |
-10°C~+60°C,20%~90%RH |
|||||
Storagetemp,humidity |
-20°C~+85°C,10%~95%RH non-condensing |
||||||
Withstand vibration |
10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes |
||||||
safety |
Withstand voltage |
I/P-O/P:2.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|||||
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC |
||||||
Fitstandard |
|
|
|||||
EMC standard |
Comply with EN55022,CLASSA |
||||||
others |
Dimension |
160*88*34mm (L*W*H) |
|||||
Weight/packing |
0.65kg/20pcs/13.5kg/0.0318 m³ |
||||||
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation |
Features:
- Constant voltage design with high accuracy.
- International wide input voltage.
- output voltage 5v/12v/24v/36v/48v selectable.
- Wattage: 15w-600w.
- High efficiency, save energy, protected environment.
- High stability and low ripple, increase light efficiency and decrease light attenuation.
- Meet to safety standard and EMC.
- Assure LED stability long lift and light efficiency by constant voltage.
- Overcurrent, overvoltage, overheat, short curcuit protection:Auto-recovery
- Start,raise,stable time: 500ms,30ms,40ms/230VAC,500ms,30ms,16ms/115VAC
- Cooling by free air convection.
- 100% full load burn-in test.
- Brand electrotronic components.
- ROHS material.
- Well match with LED guardrail lamp, Flood light, light word, street lamp etc, For LEDs series-parallel.
Environment :
- Working Temperature : -25 ~ +50°C
- Working Humidity : 20 ~ 90% RH non-condensing
- Storage Temp. , Humidity : -40 ~ +80°C , 10 ~ 95% RH
- TEMP. Coefficient : ±0.03%/°C (0 ~ 50°C)
- Vibration : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety :
- Safety Standards : IEC 61347 –2–11 , IEC 61347 –1 , IEC 60529 , IP67 approved
- Withstand Voltage : I/P-O/P: 3000KVAC
- Isolation Resistance : I/P-O/P:100M Ohms/500VDC
Application:
- Indoor LED illuminating lights
- LED Neon, LED urban Decoration
- LED Lighting Advertising,LED Display
- Safety Protection Apparatus
- Telecommunications, Networks
- Vehicle Lights, Controller Panels
Packing:
Company Information
Our team
Factory & Equipments view
CE ROHS Certification
Our Services
-
We are CE ETL audited LED drivers/power supplies enterprise in China
-
Alibaba assessed 6 years Gold Supplier and more than 10 years LED industrial experience. It will guarantee your order 100% safe
-
Price is negotiable if you have large quantity demand
-
100% QC inspection Before Shipping
-
Best Quality & Best Service with Competitive price
-
Shipping will be the most economical for you and freight cost is informed in advance
-
consideration.decision for the shipping terms will be made according to your requirements
-
We have our engineer team, if you have any question about your LED applications, let us know freely, we will give you the best solution
-
Our trade manager is online 12 hours. and we will reply your inquiry within 8 hours
-
OEM design & OEM packing welcome
-
Samples will be ready within 7 working days
FAQ
Q1. What's type power supply do you have?
A1: We specialized in constant voltage & current LED drivers, 0-10v/triac/DALI
dimmable led drivers, enclosure power suppliers, power adapters.
Q2. What's shipping mode can we choose?
A2:1.FedEx/DHL/UPS/TNT/Express for samples;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
Q3. What's the MOQ?
A3: Our MOQ is 500pcs, but we accept your trail order/small order, no problem.
Q4. What can you do if the product is broken?
A4: We promise to replace new ones to you if there is any defective happen during
the warranty period, but we need pictures or video to prove the defective comes
from our quality problem.
Q5. How about the protection of product?
A5: Most of our products have protection of short-circuit, overload, over voltage,
over current and reserve polarity. About the specific product, please consult
our sales stuff.
Q6. How about the transportation?
A6: For small order,express will be best.And for bulk order,sea ship way is best but
take much time. For urgent orders,we suggest via air to airport plus our ship partner
send to your door. We will cooperate with your choice.
Q7. What's the Payment do you have?
A7: To assure you the maximum comfort and satisfaction, Currently, you can pay via
T/T, L/C, WESTERN UNION, PAYPAL. More payment options will be added in the
near future.
- We are CE ETL audited LED drivers/power supplies enterprise in China
- Alibaba assessed 6 years Gold Supplier and more than 10 years LED industrial experience. It will guarantee your order 100% safe
- Price is negotiable if you have large quantity demand
- 100% QC inspection Before Shipping
- Best Quality & Best Service with Competitive price
- Shipping will be the most economical for you and freight cost is informed in advance
- consideration.decision for the shipping terms will be made according to your requirements
- We have our engineer team, if you have any question about your LED applications, let us know freely, we will give you the best solution
- Our trade manager is online 12 hours. and we will reply your inquiry within 8 hours
- OEM design & OEM packing welcome
- Samples will be ready within 7 working days
Q1. What's type power supply do you have?
A1: We specialized in constant voltage & current LED drivers, 0-10v/triac/DALI
dimmable led drivers, enclosure power suppliers, power adapters.
Q2. What's shipping mode can we choose?
A2:1.FedEx/DHL/UPS/TNT/Express for samples;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
Q3. What's the MOQ?
A3: Our MOQ is 500pcs, but we accept your trail order/small order, no problem.
Q4. What can you do if the product is broken?
A4: We promise to replace new ones to you if there is any defective happen during
the warranty period, but we need pictures or video to prove the defective comes
from our quality problem.
Q5. How about the protection of product?
A5: Most of our products have protection of short-circuit, overload, over voltage,
over current and reserve polarity. About the specific product, please consult
our sales stuff.
Q6. How about the transportation?
A6: For small order,express will be best.And for bulk order,sea ship way is best but
take much time. For urgent orders,we suggest via air to airport plus our ship partner
send to your door. We will cooperate with your choice.
Q7. What's the Payment do you have?
A7: To assure you the maximum comfort and satisfaction, Currently, you can pay via
T/T, L/C, WESTERN UNION, PAYPAL. More payment options will be added in the
near future.