CE 0-10V 1750mA dimmable constant current LED driver circuit 220V
SMT-22-1750CDH is 1750mA 0-10V dimmable constant current LED driver. The input voltage range is 180-265Vac and the output voltage is 13-22Vdc. The most wattage is 40W. It has 3 years warranty.
Specification:
|
Model |
SMT-45-0900CDH |
SMT-42-0960CDH |
SMT-40-1050CDH |
SMT-22-1750CDH |
||
|
Output |
DC Current |
900mA |
900mA |
1050mA |
1750mA |
|
|
|
Current Accuracy |
±3% |
||||
|
|
Voltage Range |
33-45V |
25-42V |
28-40V |
13-22V |
|
|
|
Rated power |
40W |
40W |
40W |
40W |
|
|
Input |
Voltage Range |
180～265VAC |
||||
|
|
Frequency Range |
47～63HZ |
||||
|
|
PF(Typ.） |
PF>0.9 |
||||
|
|
Full Load Efficiency（Typ） |
>86% |
>87% |
>87% |
>86% |
|
|
|
AC Current (Typ.） |
0.24A |
0.26A |
0.23A |
0.25A |
|
|
|
Leakage current |
﹤0.7mA/110-220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
|
Over voltage |
≦280VAC |
||||
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environme |
Working TEMP. |
-40～+50℃ |
||||
|
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP40 |
||||
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
|
Others |
Weight |
0.17Kg |
||||
|
|
Size |
110*45*26mm（L*W*H） |
||||
|
|
packing |
290*275*195mm/50pcs /CTN |
||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
|||||
FAQ: How does an LED work simply?
A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode that emits light when activated. When a suitable current is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons.
