dc power supply pwm output constant current 600ma triac dimmable led driver
(We promise to replace new ones to you if there is any defective happen during the warranty period)
High reliability, dualiable operation. 12-20vdc power supply, constant currnet source dimming led driver.save energy,protected environment.High stability and low ripple, increase light efficiency and decrease light attenuation
Specifications
Dimming type: triac dimmable led power supply; AC-DC Dimmable LED power supplly
I/P:90-135V/170-265, 47~63Hz
Ambient temp.:-20 degree~40 degree full load
Efficiency > 88%
PFC> 0.9
RippleI & Noise (max.) : 150mVp-p
Voltage Tolerance : ±5%
Line Regulation : ±1%
Load Regulation : ±2%
Setup, Rise Time : 500ms, 120ms / 230VAC
3 years warranty
Specification
Model
SMT-035-0350CTH
SMT-020-0600CTH
SMT-025-0500CTH
SMT-025-0500CTH
Output
DC Current
350mA
600mA
500mA
500mA
Current Accuracy
±5%
Voltage Range
23~35V
12~20V
13~25V
13-25V
Rated power
12W
12W
12W
12W
Input
Voltage Range
170~265VAC
Frequency Range
47~63HZ
Power Factor (Typ.)
PF≧0.91/110V ; PF≧0.93/220V ; PF≧0.93/250V
Full Load Efficiency(Typ.)
>84%
>84%
>85%
>85%
AC Current(Typ.)
0.14A/110VAC 0.12 A/220VAC 0.01A/250VAC
Leakage current
<0.27mA/110VAC; ﹤0.25mA/220VAC
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition
is removed.
Over voltage
≦150VAC@110V / ≦270VAC@220V
Environment
Working TEMP.
-40~+60℃
Working Humidity
20~90%RH,non-condensing
Storage TEM.,Humidity
-40~+80℃,10~95%RH
TEMP.coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz,2G 10min./1 cycle,period for 60min.
each along X,Y,Z axes
What is Dimming Operation for triac dimmable constant current led driver ?
Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
Compatible with Leading edge or tailing edge triac dimmers.
please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to
achieve the output current to zero