-
SMARTS New product listing 277vac triac dimming led power supply
09 Dec, 2020
Smarts are develop more and more dimmable & non dimmable type led driver. Here release new products: highly compatible constant 277vac triac dimming power supply. Let’s take a look at the other features of this new dimming power supply. 1. Leading edge and trailing edge dimming 2. The new constant voltage triac dimming power supply 3.0 ve...
read more
-
How many kinds of Dimming type?
22 Dec, 2020
If you are not familiar with the dimming types that are compatible with LEDs: following details will definitely help you. Mains / phase cut dimming As the power of phase cut dimming led driver is reduced in some way therefore less power reach into LED light and becomes dims. This dimming led power supply uses standard L, N，G wires, easy to install and...
read more
-
Eight tips to improve the efficiency of LED power supply
05 Jan, 2021
1. The main current loop PCB should be as short as possible. LAYPCB experience, and layout, this is nothing, the quick way is to look at the works of big factories. 2. Optimize the design of 300w LED transformer parameters to reduce eddy current loss caused by ringing. This is more difficult. First, you must master the basic knowledge...
read more
-
The knowledge for Smarts 0-10v dimmer
11 Jan, 2021
Knob version:SMT50-R-D1 1. Push-button switch, can be turned off or on at any brightness 2. With output LN port, the dimming power input can be powered from the dimmable led light switch, and the power input will be cut off at the same time after turning off the single dimmer switch 3. With fine-tuning output signal voltage, for signal lines that need to be stretched very long, ...
read more
-
What is a Class 2 power supply?
25 Jan, 2021
Generally speaking, class 2 standard is for North American market using, class II is for European market using. Both of them are important standard for safety of the power supply and the user. Here I would like to make a brief introduction for the driver power supply with class 2 standard. The class 2 here refers to the power performance and wiring requirements. When you find a po...
read more
-
The Lifetime and Reliability of led driver vs power supply
01 Feb, 2021
The LED is a device that includes a single PN junction and has conductivity on one side. The LED will only emit light when current is applied forward. Because LED lights work at low voltage, the led screen power supply needs to properly manage the load and effectively provide the required low voltage power to the LED. The street light power supply rectifies commercial AC power into DC po...
read more
-
Choose LED Power Supply or power adapter?
24 Feb, 2021
Both LED power supply and power adapter are widely used for driving LED strip light. How to choose the suitable one? Depend on the project scale and installation way. Many users intend to find a led strip driver for 5m or 10m LED strips. Here we have to explain that it is not the LED strip length that determines what led power supply driver to choose, however is the total wattage of the LED...
read more
-
Where to buy UL listed class 2 power supply?
03 Mar, 2021
For small applications, a class 2 led power supply is preferred. UL led driver power supply has passed UL lab examination and tests according to safety and function standards, in this case, this kind of power supply provide with extra guarantee in quality. Led power supply class 2 mean that the power circuit is safer, and it has lower risk of causing a fire initi...
read more
-
Advantages of outdoor power supply 24v
15 Mar, 2021
1) Low internal power loss, high conversion efficiency The outdoor power supply 24v of Smarts can reach the megahertz level. The power loss on the switching power tube is reduced, the inductance of the energy storage inductor is reduced, and the energy storage power is increased. Therefore, the conversion efficiency of the entire outdoor power supply 24v can be greatly improved, and its conve...
read more
-
What is the difference between 0-10V dimming, 1-10V dimming and 10v PWM (Pulse Width Modulation) signal dimming in 0-10v dimmable drivers?
29 Mar, 2021
Smarts Offer ce ETL UL 0-10v dimming driver in the market, they are dim by 0/1-10v , 10V PWM signal and resistance, we called 3 in 1 dimmable drivers. They are wattage from 20w to 200w dimmable driver, 12v dc and 24vdc range, then what is the difference in each dimming mode? 0/1-10V dimming: the dimme is 1-10V range: when the resistance dimmer is adjusted to the minimum 1V, the current...
read more
-
Advantages of switching power supply
07 Apr, 2021
At present, LEDs are driven by DC, so you need a led drivers for lighting that converts AC mains power into a suitable DC power for LEDs. Then, when selecting and designing led drivers for lighting, the following points should be considered: 1.High reliability Especially like the driving power of LED street lights, installed at high altitude, it is inconvenient to maintain, and the mai...
read more
-
What quality problems do ac dc led power supply generally have?
12 Apr, 2021
* Incomplete or irregular product marking The mark should contain important information that guides the user in the correct installation and use. Correctly marking the product's mark is one of the basic measures to ensure the user's personal and property safety. The mark must be durable and eye-catching. After normal use, the mark should not fall off and the content should be clean and readable. A...
read more
