-
What is the MTBF?
23 May, 2019
MTBF, that is "Mean Time Between Failure", It is a measure of the reliability of a product, especially for electrical product, the unit is "hour". MTBF reflects the time quality of the switching power supply and the ability to reflect that the led driver remains functional for a specified period of time. To be specific, it refers to the average working time between two adjacent...
read more
-
How LED lighting works with lighting system
23 May, 2019
There are different opinions on how LED lighting fixtures can be equipped with lighting control systems. The most critical part is to choose a dimming power supply. Different environments and needs, the dimming method is different, which is the common point of each dimming project. For example, the project did not have a dimming effect at the beginning, but a dimming function was needed in later p...
read more
-
What is the difference between a driver and a power supply?
15 May, 2019
LED power supply sources that provide a "constant-current LED power supply" output have typically been referred to as LED drivers. In the past, AC-DC power supplies that provided a regulated “constant-voltage” to LEDs were referred to as LED power supplies.Today, the terms "LED driver" and "LED power supply" are used interchangeably. Also, it depends on the type of LED....
read more
-
Do you need a LED transformer for LED bulbs?
30 May, 2019
All LED bulbs require a 'driver' (a special type of transformer) to work properly. Mains voltage LEDs (such as GU10 and B22 bulbs) have the driver built in to the bulb. ... If you are replacing existing incandescent 12V bulbs you will need to replace the transformer with a special LED driver. Due to increasing energy regulations, most people are familiar by now with the long life spans and energy ...
read more
-
Are your led driver flicker free?
06 Jun, 2019
Flicker can be defined as the perception of visual unsteadiness induced by a light source which fluctuates with time for a static observer in a static environment. LED Flicker is caused by voltage ripple at the output of the AC power supply. Furthermore, a stroboscopic effect is the change in motion perception induced by a light stimulus whose luminance or spectral distribution fluctuates with tim...
read more
-
What is triac dimmable?
12 Jun, 2019
With the progress of LED technology, there are many dimming modes for LED illumination, Triac dimmable LED driver is one of them. Compared with other dimming modes,Triac dimmable LED driver has its special advantages and disadvantages. The common incandescent, halogen lamps are often controlled by Triac dimming LED driver. They has no requirement on the input voltage, just...
read more
-
What is a LED driver for LED lighting?
17 Jun, 2019
An LED driver is an electrical device which regulates the power to an LED or a string (or strings) of LEDs. An LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of power to the LED as its electrical properties change with temperature. An LED driver is a self-contained power supply which has outputs that are matched to the electrical characterist...
read more
-
How to Choose a Suitable Lighting control System
19 Jun, 2020
Different people have different opinion about how to choose a lighting control system to make it suit the lamp. As per our experience, the key point is choose a good led driver dimmable. Different type of dimming modes are used according to different environment and requirement. Hence it is quiet important to choose the led dimmable driver. Especially when it involve the control system or dim...
read more
-
How do I choose an LED driver?
25 Aug, 2020
Which factors we should take into consideration when choosing an LED Drivers? And how do I choose an LED Driver? Here may have some factors we should know before choosing an led driver. Fisrt of all, constant Current type or Constant Voltage type for your lighting applications? led constant current driver power keep a constant electric current which can be used for individual or several&...
read more
-
What the 0-10v dimming?
23 Dec, 2020
1) How does the PWM dimming system realize the control of LED lights? Is it necessary to add a 0-10V dimming switch board behind the PWM system to control the lights of different circuits? If possible, a PWM system can finally bring several 0-10v led dimmer switch boards? Answer: First of all, the above understanding is wrong. Must first understand PWM dimming system and 0-10V dimming pa...
read more
-
What is PWM dimmer?
17 Dec, 2020
LEDs can be dimmed in two ways: analog and pulse-width modulation (PWM) dimming. PWM dimming has a frequency and a duty cycle. PWM dimming works by turning the LED on and off at a very high speed. The frequency determines the number of pulses per second of the LED, and the duty cycle determines the duration of the pulses. For the frequency happens so fast, human beings perceive a lower bright...
read more
-
How many kinds of Dimming type?
22 Dec, 2020
If you are not familiar with the dimming types that are compatible with LEDs: following details will definitely help you. Mains / phase cut dimming As the power of phase cut dimming led driver is reduced in some way therefore less power reach into LED light and becomes dims. This dimming led power supply uses standard L, N，G wires, easy to install and...
read more
