-
What is PFC function power supply?
17 Jan, 2019
PFC is the acronym for power factor correction or power factor controller. It minimizes the amount of reactive power produced by computers. Active PFC uses electronic circuits in efficiently distributing power to devices connected to the power supply. Power Factor Correction. Many loads are highly inductive, such a lightly loaded motors and illumination 24 volt LED Transformer and ballasts. You ma...
read more
-
About triac dimmable led driver / power supply
30 Jan, 2019
In the next two years, the smart dimming of Dimming LED Power Supply, especially in commercial lighting, will be expected to increase rapidly. Cause, with the rise of the global LED commercial lighting market, many LED manufacturers including China have placed LED commercial lighting products at an important position in market development. In particular, due to recent high-efficiency, long-life, h...
read more
-
Advantage of triac dimmable led drivers
19 Jun, 2020
Using a triac dimmer connect to the input of “N” of the triac dimmable led driver for dim the LED lamp. During the conduction process of the triac changing the voltage division ratio of the internal adjustable resistor and changing its conduction angle, the effective value of the output voltage can be changed to achieve dimming function. In addition to triac dimming mode, there are leading edge an...
read more
-
What is a led driver
23 May, 2019
Due to increasing energy regulations, most people are familiar by now with the long life spans and energy savings associated with LEDs, or light-emitting diodes. However, many are not aware that these innovative light sources require specialized devices called LED drivers to operate. LED drivers (also known as LED power supplies) are similar to ballasts for fluorescent lamps or transformers for lo...
read more
-
Why do you need a driver for LED lights?
07 May, 2019
LED drivers also protect LEDs from voltage or current fluctuations. A change in voltage could cause a change in the current being supplied to the LEDs. LED light output is proportional to its current supply, and LEDs are rated to operate within a certain current range (measured in amps). The two main types of LED drivers are Constant Voltage and Constant Current to power up the LEDs. Constant Volt...
read more
-
What MLV and ELV dimmer?
23 May, 2019
MLV dimmer is forward phase dimmer and ELV is reserve phase dimmer. Our VT2.0 triac dimming led drivers are match well with MLV dimmers, the dimming range is 0-100%, flicker free. Our engineers have test our triac led power supply compatible with LUTRON, LEVITON brand dimmer. Our 110-277Vac VT3.0 traic dimmable led drivers are match well with ELV dimmers. Compatible with 110-277V type Lutron, LEVI...
read more
-
What is constant current led driver?
23 May, 2019
Constant current led driver is very common around us. Of course, there are kinds of constant current led driver with different functions in different applications, So what is a constant current led driver / power supply? The constant current power supply is a voltage converter that converts the professional voltage and current generated by the LED power supply through the power supply, and th...
read more
-
What is the MTBF?
23 May, 2019
MTBF, that is "Mean Time Between Failure", It is a measure of the reliability of a product, especially for electrical product, the unit is "hour". MTBF reflects the time quality of the switching power supply and the ability to reflect that the led driver remains functional for a specified period of time. To be specific, it refers to the average working time between two adjacent...
read more
-
How LED lighting works with lighting system
23 May, 2019
There are different opinions on how LED lighting fixtures can be equipped with lighting control systems. The most critical part is to choose a dimming power supply. Different environments and needs, the dimming method is different, which is the common point of each dimming project. For example, the project did not have a dimming effect at the beginning, but a dimming function was needed in later p...
read more
-
What is the difference between a driver and a power supply?
15 May, 2019
LED power supply sources that provide a "constant-current LED power supply" output have typically been referred to as LED drivers. In the past, AC-DC power supplies that provided a regulated “constant-voltage” to LEDs were referred to as LED power supplies.Today, the terms "LED driver" and "LED power supply" are used interchangeably. Also, it depends on the type of LED....
read more
-
Do you need a LED transformer for LED bulbs?
30 May, 2019
All LED bulbs require a 'driver' (a special type of transformer) to work properly. Mains voltage LEDs (such as GU10 and B22 bulbs) have the driver built in to the bulb. ... If you are replacing existing incandescent 12V bulbs you will need to replace the transformer with a special LED driver. Due to increasing energy regulations, most people are familiar by now with the long life spans and energy ...
read more
-
Are your led driver flicker free?
06 Jun, 2019
Flicker can be defined as the perception of visual unsteadiness induced by a light source which fluctuates with time for a static observer in a static environment. LED Flicker is caused by voltage ripple at the output of the AC power supply. Furthermore, a stroboscopic effect is the change in motion perception induced by a light stimulus whose luminance or spectral distribution fluctuates with tim...
read more