0-10V and DALI are often used in high-end commercial lighting system. Traditionally, the lighting control system requires to be connected into the general control system of the building as a sub-system. ALI dimmable led driver is widely used and easily controlled. People often like the stunning visual effects by DALI dimmable led driver. And it is very easy to install DALI dimmable led driver. The dimming and individual control capability provided by DALI enables considerable energy savings. So there is no reason why not choose DALI dimmable led driver. An advantage of DALI is that each single light can be given a digital address, and thus be controlled independently via computer or smart phone. But the disadvantage is its complexity. To install DALI, the lights must be connected to two systems: the general power grid and the control system of the building. This makes the installation and repair work very complicated. 0-10V / DALI Dimmable Driver and control system, as well as their installation and maintenance costs, are all very expensive.
0-10V dimming started as a method for dimming fluorescents but is also used on LED lighting today. It’s typically used in offices, retail spaces and homes with fixtures that have a LED driver designed for 0-10VDC dimming input. 0-10V dimming applies a direct current voltage(DC) between 0 and 10 Volts to produce light at varying intensity levels. At 10V, the lights controlled by the dimmer are at 100% brightness. At 1V, the lights are at 10% measured brightness, which may actually be perceived as 32% brightness. At 0 Volts, it either turns the lights off or has the lights dimmed to the lowest possible level and a switch is required to turn the lights completely off.
Triac Dimmable Led Driver is the most popular option when people choose a dimmable led driver for their led light application. With the development of rapid technology, high performance, strong compatibility, convenient installation and cost advantage of Triac dimmers, are widely used in business buildings, hotels, landmark buildings, shopping malls, etc. You see that Triac can use everywhere. The advantage of a TRIAC based dimming driver is low cost, since it's the dominant type of dimmer used in the world, and does not require a seperate dimmer control circuit as in DALI, DMX or 0-10V, but uses the same 120V AC 230V AC feed, and superimposes a PWM signal onto the 120V itself, which casues the dimmer to vary to output Voltage, i.e from 12V down to 0V. Smarts Electronics Triac dimmable led driver is Leading Edge or Trailing Edge TRIAC & Magnetic dimmers. Smarts Electronics issued 12V & 24V type, 24w, 48w, 60w, 80w, 96w, 120w, 150w, 200W models. Those models are all no load limitation.
More details about Smarts Electronics’ dimmable led driver power supply, you can login http://www.smarts-electronics.com/ Or contact with Mr. Steven(skype: steven821228 mail:steven@smartselectronic.com.cn).
