-
Advantage of triac dimmable led drivers
19 Jun, 2020
Using a triac dimmer connect to the input of “N” of the triac dimmable led driver for dim the LED lamp. During the conduction process of the triac changing the voltage division ratio of the internal adjustable resistor and changing its conduction angle, the effective value of the output voltage can be changed to achieve dimming function. In addition to triac dimming mode, there are leading edge an...
read more
-
What is a led driver
23 May, 2019
Due to increasing energy regulations, most people are familiar by now with the long life spans and energy savings associated with LEDs, or light-emitting diodes. However, many are not aware that these innovative light sources require specialized devices called LED drivers to operate. LED drivers (also known as LED power supplies) are similar to ballasts for fluorescent lamps or transformers for lo...
read more
-
What MLV and ELV dimmer?
23 May, 2019
MLV dimmer is forward phase dimmer and ELV is reserve phase dimmer. Our VT2.0 triac dimming led drivers are match well with MLV dimmers, the dimming range is 0-100%, flicker free. Our engineers have test our triac led power supply compatible with LUTRON, LEVITON brand dimmer. Our 110-277Vac VT3.0 traic dimmable led drivers are match well with ELV dimmers. Compatible with 110-277V type Lutron, LEVI...
read more
-
What is constant current led driver?
23 May, 2019
Constant current led driver is very common around us. Of course, there are kinds of constant current led driver with different functions in different applications, So what is a constant current led driver / power supply? The constant current power supply is a voltage converter that converts the professional voltage and current generated by the LED power supply through the power supply, and th...
read more
-
What is PFC on led constant voltage power supply
23 May, 2019
Power factor is a factor that measures the efficiency of electrical equipment like led constant voltage power supply. The low power factor indicates that the reactive power of the circuit for alternating magnetic field conversion is large, thereby reducing the utilization rate of the device and increasing the line power loss. By improving the power factor, the total current in the line and the ele...
read more
-
What is the MTBF?
23 May, 2019
MTBF, that is "Mean Time Between Failure", It is a measure of the reliability of a product, especially for electrical product, the unit is "hour". MTBF reflects the time quality of the switching power supply and the ability to reflect that the led driver remains functional for a specified period of time. To be specific, it refers to the average working time between two adjacent...
read more
-
How LED lighting works with lighting system
23 May, 2019
There are different opinions on how LED lighting fixtures can be equipped with lighting control systems. The most critical part is to choose a dimming power supply. Different environments and needs, the dimming method is different, which is the common point of each dimming project. For example, the project did not have a dimming effect at the beginning, but a dimming function was needed in later p...
read more
-
What is the difference between a driver and a power supply?
15 May, 2019
LED power supply sources that provide a "constant-current LED power supply" output have typically been referred to as LED drivers. In the past, AC-DC power supplies that provided a regulated “constant-voltage” to LEDs were referred to as LED power supplies.Today, the terms "LED driver" and "LED power supply" are used interchangeably. Also, it depends on the type of LED....
read more
-
Do you need a LED transformer for LED bulbs?
30 May, 2019
All LED bulbs require a 'driver' (a special type of transformer) to work properly. Mains voltage LEDs (such as GU10 and B22 bulbs) have the driver built in to the bulb. ... If you are replacing existing incandescent 12V bulbs you will need to replace the transformer with a special LED driver. Due to increasing energy regulations, most people are familiar by now with the long life spans and energy ...
read more
-
Are your led driver flicker free?
06 Jun, 2019
Flicker can be defined as the perception of visual unsteadiness induced by a light source which fluctuates with time for a static observer in a static environment. LED Flicker is caused by voltage ripple at the output of the AC power supply. Furthermore, a stroboscopic effect is the change in motion perception induced by a light stimulus whose luminance or spectral distribution fluctuates with tim...
read more
-
What is triac dimmable?
12 Jun, 2019
With the progress of LED technology, there are many dimming modes for LED illumination, Triac dimmable LED driver is one of them. Compared with other dimming modes,Triac dimmable LED driver has its special advantages and disadvantages. The common incandescent, halogen lamps are often controlled by Triac dimming LED driver. They has no requirement on the input voltage, just...
read more
-
What is a LED driver for LED lighting?
17 Jun, 2019
An LED driver is an electrical device which regulates the power to an LED or a string (or strings) of LEDs. An LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of power to the LED as its electrical properties change with temperature. An LED driver is a self-contained power supply which has outputs that are matched to the electrical characterist...
read more
